Rated 2 out of 5 by jeff313 from Could be better First the finish looks more like aluminum and does not match the stainless steel stove. This is a real disappointment that ruins the factory look of the stove. Second the side pieces need to be a little bit longer and thirdly the side and back pieces do not line up properly. If you line up the corners the beveled edges do not match and likewise if you line up the beveled edges the corners do not match. The only real good thing is the 3M double sided tape that does an excellent job holding the pieces in place.

Date published: 2020-06-19

Rated 1 out of 5 by Katruss from Terrible product- BUYER BEWARE I originally purchased 2 of these from another website and after receiving them I found that the side pieces are about 1/4" too short and do not meet up with the back trim piece the way they should. So I decided to pony up the cash and buy directly from Kitchenaid where it ended up costing $123 plus $15 in shipping only to find out it is the exact same product I purchased from another website, that is ... you guessed it... too short. Oh and when you think you are buying from the Kitchenaid website, it wont let you. You are directed to call in and they tell you they are transferring you to the parts department, but it's a completely different company you are buying from. Kithenaidparts.com BUYER BEWARE. Not what I expected after spending almost $3,000 on my new range.

Date published: 2020-02-20

Rated 4 out of 5 by seattle from Fits well, but should be included Regarding color, we think it’s just fine. However it also comes in white and black in case you want to get creative or if that would better blend in with your granite. Home Depot has them in stock. My granite cutter was apprently drunk when he cut the hole, so this did the trick to cover the crookedness. -1 star that Kitchenaid doesn’t include this as standard with a slide-in range.

Date published: 2019-01-19

Rated 1 out of 5 by SLR1 from Poor Design Love the kitchenaid downraft range. Hate the ill fitting and poorly engineered trim kit. Sales staff assured me trim would be seamless, it is anything but. Kit has 90% corners, range has rounded corner. This makes for 1/4 gaps at the rear. This along with fact back of range is not straight ( more gaps) and side bits are cut too short. Had I known all this, ..I would have never purchased this range. I never post reviews of any sort, but this is so terrible.

Date published: 2019-12-13

Rated 1 out of 5 by WSA2 from Doesn’t match stainless range or any other appl Ordered this for my 30” dual fuel stainless range with downdraft and it doesn’t match. I understand stainless can be different grades but this appears to be brushed nickel or aluminum and is a much lighter color than the stainless of my range and 4 other Kitchen Aid appliances. Trying to work with customer service now - will update if they make it right but have to give a 1* bad rating for now. See attached photo for color difference.

Date published: 2018-05-09

Rated 1 out of 5 by Katruss from Terrible product- BUYER BEWARE I originally purchased 2 of these from another website and after receiving them I found that the side pieces are about 1/4" too short and do not meet up with the back trim piece the way they should. So I decided to pony up the cash and buy directly from Kitchenaid where it ended up costing $123 plus $15 in shipping only to find out it is the exact same product I purchased from another website, that is ... you guessed it... too short. Oh and when you think you are buying from the Kitchenaid website, it wont let you. You are directed to call in and they tell you they are transferring you to the parts department, but it's a completely different company you are buying from. Kithenaidparts.com BUYER BEWARE. Not what I expected after spending almost $3,000 on my new range.

Date published: 2020-02-20

Rated 4 out of 5 by drog55chev from Trim Kit #W10675028 for KSDB900ESS Range I'm a contractor so I have installed a lot of slide in ranges. I didn't buy these on Amazon because it was not only unavailable but more expensive, same on the Whirlpool site. I bought it from Appliance Parts Pros. First off, there is only two things I don't like about this trim kit (W10675028). One is the finish. However the manufacturer makes it to fit probably half the Whirlpool ovens. Some will have a brushed stainless finish which would match and mine which is more of a polished stainless finish doesn't match but still looks okay. Second, the side trim pieces are 22-7/8" and if you have a normal countertop with a back splash only and push some ranges back to the wall like it should be, these side pieces would be too short. Fortunately my previous oven and countertop was cut as an alcove so there was 2-1/4" on the back. It says in the installation manual: "remaining counter depth should not exceed 2¼". Mine had about 2-3/4" to the wall so this works about right if I cut the back out another 1/2". All the pieces fit with the front bevel of the trim piece even with the front radius of the countertop. I'm glad I didn't cut that rear area out fully until I got the trim pieces. The front bevel on the trim piece should line up with the radius on the front countertop (see picture #1). I would perfer to cut out that entire rear area and push the range back 2-1/2 more inches because the range is pretty deep but you have to fudge back and forth to make things as good as they can be. My range has black side panels so those are noticeable. They could have made the side pieces longer and we could cut the length to fit. The only other way would be to go to a sheet metal shop and have pieces made which would match the range but would cost a lot more. I've done that before for other customers. A lot of people on these reviews say the trim pieces don't line up in the rear. I believe they're not installing these properly. The range needs to be about 1/8" above the countertop. If you can't get this measurement because of countertop or flooring thickness then these won't work or you'll have a gap if too high. The inside radius of the trim piece (see picture #3) needs to go over the top radius of the range not to its side. If you do that the rear connections will fit perfectly on each side (see picture #2). I also used a little silicon caulk under this trim kit to the oven to keep grease, etc. from getting underneath it. BTW the measurements of the trim pieces are: sides (22-7/8") and rear (31-1/16"). Hope this review helps others but other than the finish and side pieces needing to be longer I like them.

Date published: 2023-12-07

Rated 1 out of 5 by Eulee from Did not match the stainless steel range The trim kit did not match the color and style of the stainless steel range and did not fit the back of the range properly, it seemed to be very generic. For the money you could do better with a simple plastic trim kit that you can buy elsewhere and cut it to fit. The return process was the worst part of my experience, it took 3 weeks for the service dept to issue a tracking number so I could get it returned. I had to make multiple calls to make it happen.

Date published: 2019-12-08

Rated 1 out of 5 by TLK45 from Range trim kit Very disappointed with the range trim kit. We have had four different kits and none were the correct size. The installer from the appliance store have taken pictures and measurements and sent them to KitchenAid but to no avail. Our range is not a custom appliance. You would expect the trim kit would fit.

Date published: 2021-04-03

Rated 4 out of 5 by Zen6543 from Fits ok Fits ok, better than nothing, but God Forbid they have it in stock....

Date published: 2019-01-11