No image available
No image available
Your request is being processed.



1-Piece Pouring Shield with Wide Chute

1-Piece Pouring Shield with Wide Chute is rated 1.5 out of 5 by 42.
  • y_2017, m_12, d_11, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_en_US, sid_KN256PS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_kitchenaidbrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 447ms
  • REVIEWS, PRODUCT

The one-piece pouring shield fits onto your mixing bowl to help you add ingredients without making a mess. It also helps keep lightweight ingredients like flour from flying out of the bowl when you’re mixing. The pouring shield is dishwasher safe. Fits models KV25G &KP26M1X

AVAILABLE COLOR OPTIONS

Other
Other  -  KN256PS

Features

Pouring shield

Pouring shield

Reviews

Rated 1 out of 5 by from A Real Bummer I wish I would have read these reviews before buying this, like everyone says, it just sits on the bowl, no snapping in place at all. unless you hang on to it while pouring, Look out! and get ready to clean up the mess.
Date published: 2017-11-28
Rated 1 out of 5 by from Terrible Doesn't fit. Chute too short to do any good. Opening in back too wide causing ingredients to fly out. Cost way too much to be unusable!
Date published: 2017-10-27
Rated 4 out of 5 by from KN256PS: The Pouring Shield with a Necessary Tweak "A Necessary Attachment that Works well when Tweaked" For my Artisan 5-bowl mixer, I initially bought the wrong model shield, KN1PS; it was too big, and I had to return it. The refurb models aren't listed, telling what model number of shield to buy, so I looked at shields that would fit any tilt-head'150' model. I read the reviews and finally bought one that fits better, the KPS2CL, on sale with a terrific savings from one seller, but this model could still use a tighter fit. Problems with shield fit could be alleviated if KitchenAid created a table, denoting all mixer models (refurbs included) that each shield fits (and keep this table updated as newer and other models are created). Alternately, KitchenAid could create a standard shield that flexes to fit all bowl sizes but with a 3-4" silicone band or something similar with stretch that hugs and adjusts the shield to securely clamp down onto the bowl in use. (Note that there is no pouring shield that fits my glass bowl, which has a very thick rim.) For my Pro 600 6-bowl lift mixer, I bought the correct-fitting pouring shield after having read many online reviews and discussions: the KN256PS, but like my Artisan shield, it did not fit tightly onto the bowl; it also just sat on top of it. In the short-term for both of my metal bowls (5 quart and 6 quart), I jerry-rigged this problem by cutting up a T-shirt and am using the bottom part of it as a band now (tightened and then clipped with a clothes pin around the shield) to hold it snugly in place until I can find something that looks more professional and aesthetically pleasing. However, this works, so I would advise that buyers keep their pouring shields.
Date published: 2017-07-17
Rated 1 out of 5 by from Wish I'd read reviews before purchasing I'm so sad. This thing is worthless. It doesn't stay on at all. May work as a cover, but could never use for pouring.
Date published: 2017-02-26
Rated 3 out of 5 by from Pouring Shield I have used the pouring shield a few times and it worked great for me with the wet mixes but with straight dry ingredients, it's exactly like people have said. I modified mine a bit to help this but then I have my own shop I can do this in. If they don't have a redesign for the pouring shield you may want to try some modifications to make it work better for what you're using it for. The 3 star rating is basically because it works for me one way but not the other. So sort of a neutral rating.
Date published: 2017-02-17
Rated 5 out of 5 by from Good for those extra messy mixes. This item is good for those extra messy mixes that have lots of dry ingredients that have to be added or for really liquid mixes that tend to make a splash. Some say this item needs to be more closed and allows too much to escape unlike a previous model. I haven't used the other version but would say that if there is to be a really wide chute then maybe the back can be closed up a little more. There are two areas where material can fly out of the bowl. However, I think it is much nicer than to have nothing at all. Some say that this item doesn't fit the bowl or it falls off of the bowl when the mixer is working. I found that it fit my bowl nicely. There are tabs that go on the outside of the bowl. If you fit two tabs on the outside of the bowl and find that there is one on the inside all you have to do is slightly and gently open the shield to fit the other tab on the outside. This allows the shield to gently hug the outside of the bowl. Voilà! Yes it would be nice to have the shield almost go all the way around except for the chute but I am happy with this item. I have purchased two so far. I do think the price could be improved on since the shield does have such big opening and is so easy to break. I'm sure I'll be buying more. If this is redesigned have a wide chute is great but the wide opening in the back is not. Perhaps they could be combined somehow or the opening in the back narrowed.
Date published: 2017-01-19
Rated 1 out of 5 by from Terrible design. Doesn't work very well I got the 5qt tilt-head stand mixer a couple years ago for Christmas and was so excited it came with the pouring/splatter shield. Unfortunately, I was sorely disappointed when the shield did nothing to keep the dry ingredients from flying out of the bowl and all over my counter and floor! I have since got the Blass bowl (which i love) and attempted to try the shield again - what was I thinking?! Flour was everywhere! The pour spout is also was too small to pour anything like sugar or flour where partials can go flying. Very poor design. They need to recreate this cover so that it not only stays securely on the bowl (both glass and metal), but close off the openings so dry ingredients don't have a chancestors of fly out of the bowl.
Date published: 2016-12-25
Rated 1 out of 5 by from Doesn't stay on. Poorly designed I was so excited this came with the stand mixer I bought the other day... then I tried using it. It doesn't even stay on. You have to make sure it lines up correctly and even then it won't stay on. It's completely useless. I should have saved myself $70 and got the cheaper model that didn't come with this.
Date published: 2016-12-15
Rated 1 out of 5 by from disappointed My husband bought me the Artisian stand mixer a couple of months ago, I thought it was weird that it did not come with a pouring shield, so i bought it separately and what a disappointment. It doesn't close /fit tight around the bowl and the gap allows flour to spray out onto the surrounding area. I threw out the packaging, or i would return it. I love the mixer, it was an upgrade from a competing stand mixer,and it is far better. I just wish the shield worked.
Date published: 2016-12-10
Rated 1 out of 5 by from Horrible design, does not stay on, NEEDS REDESIGN I bought this for my wife and am glad I tried it out first. It will not stay on at all and slips off constantly. Also I am left handed and it would be very cumbersome for me to use. Expected much better from KitchenAid brand.
Date published: 2016-12-06
  • y_2017, m_12, d_11, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_en_US, sid_KN256PS, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_kitchenaidbrand
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 229ms
  • REVIEWS, PRODUCT

Regular Price:

$29.99

Add to Cart
 
Back to top
CLOSE X
Live Chat
Live Chat